 |
 |
 |
 |
 |
 |
Double E Company, LLC
USA Headquarters
319 Manley Street
West Bridgewater, MA
02379
Tel: (508)588-8099
Fax: (508)580-2915
doublee@doubleeusa.com
Solutions for All of Your Web Handling Needs
~ accessories for the paper, film, and foil web converting and packaging industries ~
UC-3000 Bladder Chucks / Air Chucks
Air-inflated through-shaft adapters for running various
core diameters.
Lightweight,
durable bladder chucks make running large and/or various sized cores
quick,
easy, and safe.
| UC-3000
Air-Inflated Bladder Chuck Adapters |
|
 An optional air hose connects the air chucks for convenient inflation and deflation. A single valve is used to control both bladders. |
30 to 50 percent lighter than competiting chucks or adapters. Proprietary urethane bladder material resists stretching, cutting, and abrasion - doesn't swell like rubber so the air chucks don't get stuck in cores. Rugged clamping flange does not suffer from the recurring fatigue problems seen in other bladder chucks. No need for maintenance. |
| UC-3000
Air Chucks Complemented by Carbon Fiber Shafts |
|
When used together, Double E bladder chucks and carbon fiber shafts provide a high strength, ultra–lightweight, and cost effective solution for handling large and/or various core diameters.
| |
To
watch a short video about the UC-3000 bladder chuck, please
click below.
|
|
To request a quotation on UC-3000 Bladder Chucks, please click here.
| 1 |
High-strength aluminum body minimizes chuck weight. |
|
2 |
High-strength clamping flange allows easy positioning of chuck, but will not crack or break. |
|
3 |
Stainless steel air valve will not rust. |
|
4 |
Stopping flange allows easy roll positioning. |
| 5 |
Flange cap. |
|
6 |
Proprietary polyurethane bladder resists stretching and puncture - can even withstand repeated knife cuts.. |
| 7 |
End cap. |
Three-inch
UC-3000 Air Chucks |
|
 |
The three-inch UC-3000 air chuck is often used in web applications with light to medium tension and with light roll weights. Mounts easily onto a through shaft, and usually works in conjunction with a supporting roll collar at the opposite end of the roll. The chuck commonly replaces old-style cones or wedges (which are heavy and/or labor-intensive to use) on narrow web packaging, form, fill & seal, and tag, tape & label machinery. The LC-1000 Latching Roller Chuck is commonly used in similar applications when air inflation is not possible or not desired. Also available as a cantilevered air chuck. |
UC–3000 “Ultra-Chuck” bladder chucks are lightweight shaft-mounted adapters which make running various core sizes quick and easy. The chucks can be repositioned or replaced with little effort to accommodate various web widths or different core sizes.
An optional air hose connects two chucks for simultaneous inflation and deflation.
The Ultra–Chuck is a proven product from an industry leader. It performs reliably and consistently, and carries a long, comprehensive warranty.
Solid body design and dual clamps are available for heavy duty applications.
To request a quotation on UC-3000 Bladder Chucks, please click here.
 |
 |
 |