 |
 |
 |
 |
 |
 |
Double E Company
USA Headquarters
319 Manley Street
W. Bridgewater, MA
02379
Tel: (508)588-8099
Fax: (508)580-2915
Solutions for All of Your Web Converting Needs
accessories for the paper, film, and foil web converting and packaging industries
Double E Core Shaft Specifications Sheet
Please fill out this form as completely as possible. Comprehensive details will expedite your quote. Thanks!
Customer Information
Company Name:
Type of Business:
Individual Contact:
Title:
Address:
City:
State:
Country:
Postal Code:
Telephone:
Fax:
Email:
General Specifications
Actual Shaft Diameter:
in.
Core I.D.:
inches +/-
/
Core O.D.:
inches +/-
/
Core Material(s):
Paper/Cardboard
Plastic
Steel
Composite
Other
If other, please speciffy:
Core Wall Thickness:
in.
Core Manufacturer and Grade:
Steel Capped Cores?: All
None
Some
Minimum Roll Diameter:
in.
Maximum Roll Weight:
lbs.
Minimum Roll Weight:
lbs.
Maximum Roll Width:
in.
Minimum Roll Width:
in.
Roll Position on Shaft:
Center
Left
Right
Maximum Web Speed:
feet/min
Minimum Web Speed:
feet/min
Maximum Web Tension:
pli
Minimum Web Tension:
pli
Type of Wind:
Unwind
Rewind
If drum supported, please choose the most appropriate setup:
Not drum supported
If Slitting:
Minimum Slit Width:
in.
Maximum Weight of Minimum Slit Width Roll:
lbs.
Maximum Number of Slits:
Maximum Total Weight of Slit Rolls:
lbs
.
Shaft Details:
A Dimension - Overall Shaft Length:
in.
B Dimension - Shaft Body Length:
in.
C Dimension - Bearing Center to Edge of Body:
in.
D Dimension - Support Separation:
in.
Bearing Material:
Which is the Drive Side of the Shaft?:
End "A" left side (indicated by the black letter "A" above)
End "B" right side (indicated by the black letter "B" above)
Where should the air valve be located?:
End "A" (left side) on the end
End "B" (right side)
on the end
End "A" (left side) on the side
End "B" (right side)
on the end
Present Application
Equipment Manufacturer:
Product(s) Made or Converted:
Paper
Film
Foil
Textile
Other
If other, please specify:
Type of Application:
Slitting
Printing
Laminating
Other
If other, please specify:
Hoisted: Yes
No
Air Pressure Available:
psi
Existing Shaft(s)
Manufacturer:
Material:
Wall Thickness:
in.
Weight:
lbs.
Problems with Present Shafts:
Weight
Deflection
Injuries
2 Operators Needed
Other
: If other, please specify:
New Shaft(s)
Quantity of New Shafts Required:
Type Desired (ie. Strip Shaft, Air Lug Shaft, Mechanical Lug Shaft, etc.):
Housing Material Desired: Carbon Fiber
Aluminum
Steel
Shaft Journals
Providing a detailed sketch of both journals (or an actual CAD drawing of your shaft) is helpful. If you have either one available, please attach it here.
File to upload:
If you are sending a sketch, please include all journal dimensions and note positions and dimensions of all keyways, drive pins and/or drive keys.
Left Journal Support (End A) |
Right Journal Support (End B) |
|
|
|
|
Steel Bronze Plastic |
Steel Bronze Plastic |
Bearing Housing Snap Ring Lock Nut with Keyway Set Screw Bearing Number: if not available, OD in. ID in. Width in. |
Bearing Housing Snap Ring Lock Nut with Keyway Set Screw Bearing Number: if not available, OD in. ID in. Width in. |
Safety Chuck
|
Safety Chuck
|
If using safety chucks, please specify manufacturer and model:
|
|
If you are not sending a sketch (or if your sketch does not include these details), please complete as applicable:
Keyway |
End A |
End B |
Length |
in |
in |
Width |
in |
in |
Depth |
in |
in |
End A |
End B |
|
Drive Pin |
||
Drive Pin Length
in Drive Pin Diameter in Drive Pin Set Screw: Yes No |
||
End A |
End B |
|
Drive Key |
||
Drive Key Size
Drive Key Length in Drive Key Set Screw: Yes No Drive Key Bolt:Yes No If yes, bolt size: |
||
Please click the Submit button just once.
If you have attached a file, please
allow a short time for uploading. Once the file has uploaded you will be taken to a success page.
Thank you.
 |
 |
 |